A mechanical filter is a type of filter that is primarily used to remove suspended solid particles. It can be used to maintain the cleanliness of a system and prevent wear or corrosion.
Mechanical filters are very useful in industrial settings, such as in cooling systems where the environment is extremely corrosive.
In many industries, engine failure is often caused by cooling system problems. This can be caused by many factors, such as insufficient maintenance. If not properly maintained, the engine and cooling system can be extremely susceptible to corrosion. Coolant, extreme heat, metal parts, and other factors can all lead to corrosion and ultimately failure.
This is why the use of mechanical filters is essential. For example, if the cause of the problem is a small leak in a corrosive device, the suspended corrosive particles must be removed from the system to prevent severe corrosion damage.
Therefore, the industrial world should make a habit of using mechanical filters that can operate seamlessly even in adverse environments such as heat, mechanical, and corrosion. These filters provide solutions for everyday industrial applications.
When mechanical filters are functioning properly, industrial problems such as contamination and failure can be avoided, making mechanical filters an essential part of industrial operations. With a clean, operable system, corrosion problems can be avoided.
the characteristics of mechanical filtersA:
1. Working principle
Mechanical filter is to use one or several filter media, under a certain pressure, make the original liquid pass through the media to remove impurities, so as to achieve the purpose of filtration. The fillers inside are generally: quartz sand, anthracite, granular porous ceramics, manganese sand, etc. The user can choose to use according to the actual situation.
Mechanical filter mainly uses fillers to reduce water turbidity, intercepts suspended solids, organic matter, colloidal particles, microorganisms, chlorine smell and some heavy metal ions in the water in the area, and is one of the traditional water treatment methods to purify the feed water.
2. Performance characteristics
Low equipment cost, low operating cost and easy management
The filter material can be used multiple times after backwashing, and the filter material has a long life
Good filtering effect, small footprint.
3. the scope of application
Mechanical filtration is widely used in the water treatment process, mainly used for water treatment to remove turbidity, reverse osmosis, and the pre-pretreatment of ion exchange softening and desalination systems. It can also be used for surface water and groundwater removal. The inlet water turbidity is required to be less than 20 degrees, and the effluent turbidity can reach 3 degrees or less.
4. the selection of mechanical filters
The size of the mechanical filter depends on the amount of water. A3 steel, stainless steel or glass fiber reinforced plastic can be selected according to different uses. According to the water quality and the requirements of the water quality, you can choose single-layer filter material, double-layer filter material or multilayer Filter material.
